TONNY INTERNATIONAL CO., Ltd

Textile Tester(11)

Showing 1 - 10 of 19, total 2 pages [First] [Previous] [Next] [Last]

snap button tester
Specification: TNG46
Detail: The intention of this test is to define the slopwork manufacturer duty to ensure fastener, button and fixing article could be properly fix to the slopwork to prevent the departure of fastener leading to infant ingestion ventur...

ultra- high hydrostatic head tester
Specification: TNG37C
Detail: For special requirements to the Ultra-High Hydrostatic tester. To ***ermine the resistance of fabrics to water penetration under pressure whilst firmly clamped in the test rig of 100cm2 area. Water pressure is applied by means...

hydrostatic head tester
Specification: TNG37B
Detail: To ***ermine the resistance of fabrics to water penetration under pressure whilst firmly clamped in the test rig of 100cm2 area. Water pressure is applied by means of compressed air and distilled water with a range of 0-500cm ...

digital bursting strength tester
Specification: TNG34
Detail: To ***ermining the bursting strength of woven or knitted fabrics, non wovens, paper and board by application of a hydraulic load under a rubber diaphragm of a specific area. Provided with a digital readout of pressure with pea...

mullen bursting strength tester
Specification: TNG33
Detail: To ***ermine the bursting strength of plastics, paper, textiles, and. no woven fabric. The commonly used models C can achieve maximum measurable 200psi. Unique device enables transmissions pressure stable. Electric-driven pump...

din abrasion tester
Specification: TNG32
Detail: Applicable flexible materials, rubber, tires, conveyor system, transmission belts, Sole, leather etc¡. he adequate testingt area can take this apparatus directly which is the largest features of this tester. easy operation an...

taber wear and abrasion testers
Specification: TNG31
Detail: Taber Wear and Abrasion Testers. To ***ermine the wear resistance of all kinds of structures including metals, paints, plated surfaces, coated materials, textiles, leather and rubber. Uses the X pattern of abrasion produced by...

universal wear tester£¨stoll quartermaster£©
Specification: TNG30
Detail: To ***ermines the wear and abrasion resistance of fabric used in clothing, footwear and industrials. Supplied with surface abrasion head (inflated diaphragm method and flex abrasion head as well as necessary weights and initia...

circular fabric sample cutter
Specification: TNG27A
Detail: Circular Fabric Sample Cutter 100cm2 fabric combine with the electronic balance. Suitable for 100 cm2 x 5mm depth of cut, provided with the cutting mat and the ***re blades Accessory : ***re blades (4pcs) Cutting map (1 p...

shroder fabric weight balance
Specification: TNG26
Detail: To ***ermine the fabric weight nicety, accurate measurement fabrics gram portable electronic scales, provided with LCD display, stainless steel plate, touching switches, sealed before the board. With wind-proof caps Unit co...


Showing 1 - 10 of 19, total 2 pages [First] [Previous] [Next] [Last]
1 2